Smartbox, based on the Telit Chipset HE910 is a ready to use solution for connecting Modbus devices to the Cumulocity Fieldbus Cloud. It provides a Master Slave Communication on RS485 for connecting up to 10 devices as well as 10 Sensors (Current ,Temperature, Pressure). Easy configure the SetUp of building automation fielddevices like pumps, e-meters, Airhandling units in the Cumulocity Fieldbus cloud or connect different sensortypes to the box. Using the MQTT protocol the terminal comes up with a low traffic solution for decentralized applications.
SMARTbox CubeIO
Radio
| 4G LTE | LTE Cat 4 (incl. 3G/2G)
LTE Cat 1 (incl. 3G/2G) LTE Cat M1 NB-IoT (Cat NB1) |
| 3G | UMTS | HSPA+ (incl. 2G)
UMTS | HSPA (incl. 2G) |
| 2G | GSM | GPRS |
| Regions | EMEA / APAC / Latinamerica / NorthAmerica / Australia / Global (3G / 2G) |
| GPS | Supported by 2G and 3G Variances |
| Production | The selected Region,Technology and GPS can be defined during Production. The default assembly is 3G with supported regions EMEA / APAC |
Connectivity
| Layout |  |
|
| Fieldbus Modbus
|
Type | Modbus RTU Master |
| Baudrate | 4800, 9600, 19200, 38400, 57600, 115200 | |
| Parity | Even, ODD, NONE | |
| Stoppbits | 2,1 | |
| Functioncodes | Funct.1 (Read Single Coils)
Funct.2 (Read Input Status) Funct.3 (Read Holding Registers) Funct.4 (Read Input Registers) Funct.5 (Write Coil) Funct.6 (Write Holding Register) |
|
| Datapoints | Max. 10 Modbus Slaves, with 100 datapoints per device or 1000 datapoints with 1 device | |
| Sensors | 12 Universal Inputs | |
| U1/U2 | DIN NO [voltage free] / DIN NC [voltage free] /0..20mA/4…20mA/0..10V/2..10V/0..5V | |
| U3/U4/U5/U6 | DIN NO [voltage free] / DIN NC [voltage free] /0..20mA/4…20mA | |
| U7/U8/U9/U10 | PT1000 | |
| Output | 24VDC Digital Output. Note: Either the Output or the 2nd Fieldbusinterface can be selected during production | |
| DIN/O | DIN [voltage free] | |
| AIN/O | NTC (selectable by Hardwarejumper, either NTC or 0..20mA) | |
| AIN/P+ | 0…20mA (selectable by Hardwarejumper, either NTC or 0..20mA) | |
| 2nd Fieldbus | RS485 | Customized Interface for Modbus RTU Master/Slave,, Custom Interface. 24VDC Digital Output. Note: Either the Output or the 2nd Fieldbusinterface can be selected during production |
| LEDs | GSM | Flashing- connected to mobile network |
| RUN | 2xflashing/pause: StartUp Phase
3xflashing/pause: Connected to Server, Data exchange |
|
| Act | Flashing: Sensor Board Power | |
| Link | Flashing: Sensor Board is ready to process data | |
| USB | For programming, Logging and Trace the device | |
Cloud Connector
| Availability | All Cumulocity Based systems, Cloud der Dinge Deutsche Telekom | |
| Realtime Clock | Updating Realtime automatical from #NTP timeserver | |
| Application | CloudFieldbus (CFB Integrated in Devicemanagement)
For SetUp connected field devices |
|
| Online Operations | Remote Restart
Fieldbus Configuration Cloud-Device Change Transmitinterval from device to Cloud Change Communication. Baudrate, Databits, Parity, Stopbits Operate the connected Field device: Registervalues (R/W) Operate the connected Field device: Change CoilValues (R/W) Operate the device with AT Commands in the shell |
|
| Communication | MQTT | |
| Security | TLS-Security 1.0 / TLS 1.2 (ab Version 2.4.x) | |
| Notifications | Realtime and Pending Operations | |
| Shell | Operate the device with AT Commands in the shell | |
| Location | Identification by cellular network or GPS Signal (selected- see Radio) | |
| Tracking | Location Route by by cellular network or GPS Signal | |
| Info | Operator, Cell ID, LAC, MNC, MCC, Signal strength | |
| Device Database | Device database Support: Measurements, Event, Alarms, Values, Read, Read/Write, Signed/Unsigned, Decimal Places, Multiplier, Divisor, No of Bits, StartBit | |
| OTA | RemoteUpdate Software | |
| Data-Exchange | Values | On Change |
| Alarms | On Change | |
| Events | On Change | |
| Measurements | Default 900 | |
| Signal strength | Is sent every 20 Min as a measurement | |
| Offline Buffering | Alarms, Events, Measurments ≈ 72h | |
| SMS | For Troubleshooting you can operate the device by SMS:
Reboot Change tenant FOTA/OTA |
|
Edge Processing (Agent > 2.4.x)
| FUP Plan | Supporting, 3 x PID Control, And, XOR, NOR, NAND, Multiplexer, Conversion, up to 500 Signals |
| Deploy Remote | Deploy remotely by Cloud (SW Download) |
General
| Dimensions | 70 x 70 x 45 mm |
| Weight | 89g |
| GSM Antenna | SMA Connector |
| Power Supply | Nominal voltage range: 12-24 VDC, 10%
Maximum continuous (average) supply power: 2.5 W Maximum continuous (average) supply current: 200 mA at 12V, 100 mA at 24V |
| Mounting | Via DIN Rail Adapter or Adapter for Wall Mounting |
| SIM Card Format | 2FF |
| Operating temperature | -20..60°C |
| Storage temperature | -40..85°C |
| Operating humidity | Max. 85% |
| Storage humidity | Max. 85% |
| IP Class | IP20/IP54 (opt.) |
| Approvals | |
| Conformity Declerations | 2014/53/EU (Radio Equipment Directive – RED)
Radio EN301511 v12.5.1 for GSM 900 and 1800 MHz EN301908 v11.1.1 for UMTS band 1 and 8 EMC EN 301489-1 v2.1.1 general part EN 301489-52 v0.0.7 for GSM and UMTS Safety EN60950-01 |