SMARTbox nano

SMARTBox nano, based on the Telit Chipset xE910 is a low Power device M2M Modem which can connect either by NB IOT or TCP/IP connection to the CloudofThings of Deutsche Telekom. SMARTBox nano includes various environment sensors in addition to GNSS location information for Tracking

Radio / GPS
NB-IOT Telit ME910C1-E2

NB-IoT / CAT M1 / 2G Fallback /GNSS

2G/3G GPS Telit HE910 EUG

2G/3G/GPS

Production The default assembly is 2G/3G with supported regions EMEA / APAC and GPS
Sensors
Laser Ranging Sensor

Laser Range d200
  • Class 1 laser device compliant with latest

standard IEC 60825-1:2014 – 3rd edition

  • 940 nm laser VCSEL
  • Measures absolute range up to 2 m whatever the

target reflectance

The angles of emitter and Collector are as described above

3 Axis Accelerometer
  • 3-axis accelerometer, ±2g/±4g/±8g
  • Data rates Sleep 10 Hz
  • Continuous Mode
    • Data Rate 100hz (up to 800 Hz possible)
    • Shock detection
    • Continuous Measuring and Min/Max Detection in all 3 axis
Battery

General The Smart RestAgent/MQTT SN Agent for CoT supports 4 Modes:

  1. Sleep
  2. Idle mode (Get and buffer sensor data , not sending)
  3. Operative Mode (Get sensor data, sending / +buffered data)
  4. Operative Mode + GNSS
  5. Full Mode (only when external Power source is connected)
Battery Options Option1: 6000mA LiPo on 3.80VDC
Option2: 6000mA Primary Cell on 3.80VDC
Charging LiPo (Option1)

Battery management for charging LiPo (Option1) by standard Micro USB Charger with min 500mA. The charging duration is min.5 hours by using Option1
Consumption Radio ME910 (NBIOT)

Sleep:12µA

Idle mode: 12mA

Operative Mode: 60mA

Operative Mode + GNSS: 90mA

Radio HE910-EUG:

Sleep:50µA

Idle mode: 12mA

Operative Mode: 150mA

Operative Mode + GNSS: 190mA

Wake Up

Wake Up:

  • The device can be waked Up by a hourly scheduler defining all 4 modes (sleep Mode, idle Mode, Operating Mode) individual in the wakeup event
  • Sporadic Wake Up can be triggered by a settable shock event
Activity detection

In Operating Mode the duration of Activity can be counted and calculates the overall running hours
Temperature Monitor

Temperature measuring

Temperature accuracy: ± 0.5 °C,-15 to +40 °C

Humidity Monitor

Humidity measuring

Humidity accuracy: ± 3.5% rH, 20 to +80% rH

LEDs GSM Off – the device is in sleep Mode

Flashing- connected to a mobile network with data exchange

RUN Off – the device is in sleep Mode

Slow flashing – The device is waked up and in low Power mode

Fast flashing – the device is waked Up and in Full Power Mode (USB is connected)

Charge Charging LED. The LED is steady blinking when the LiPo is in Charge Mode
USB Beside charging the USB can be used

For programming and Trace the device

Cloud Connector
Registration by Device Bootstrap yes
Mass Registration yes
Availability All Cumulocity Based systems, Cloud der Dinge Deutsche Telekom
Realtime Clock Updating Realtime automatically from #NTP timeserver
Application Low Power Application which
General The Agent is made for Low Power applications. By using this agent, the device will wake up by scheduler or by shock event and send configured data. All settings can be done in configuration tab in the CoT. The following settings are possible:

Configuration Analogue Input c8y.ConfigAin=0
c8y.adcseries=–
c8y.adctype=–
c8y.adcunit=–
c8y.cycle=900
c8y.scalerY2=100
c8y.scalerX2=1200
c8y.scalerX1=0
c8y.scalerY1=0
c8y.offset=0
Configuration Digital Input c8y.ConfigDin=0
c8y.DinLogic=0
c8y.ditext=Alarm
c8y.ditype=–
BatteryMng c8y.BatteryChargingLevel=1
c8y.CellVoltage=370
c8y.CapacityOneCell=3000
Ranging sensor c8y.Distance=0
c8y.MaximumDistance=2000
c8y.OffsetDistanceMicroMeter=0
Temperature Humidity c8y.Temperature_Humidity=1
Scheduler c8y.Scheduler=222222222222222222222222
Sporadic wakeup Type c8y.SporadicWakeup=0
/*==================================================================================================

SCHEDULER/Sporadic wakeup

scheduler has 24 single numbers, each representing one hour

0 o’clock 23

Scheduler: 000000000000000000000000

0: no wakeup

1: wakeup and buffer measured value

2: wakeup and send measured value and buffered values

3: wakeup and send measured value and buffered values and send cell ID

4: wakeup and send measured value and buffered values and send GPS location

0-23 O’clock “211111111111111111111111”; at 0:00 measuring and sending

==================================================================================================*/

Accelerometer Configuration c8y.AccelFullscale_mg=2000
c8y.AccelWakeUpThreshold_mg=100
c8y.AccelWaitingThreshold_ms=500
Communication Smartrest
Security TLS 1.2
Notifications Pending Operations
Shell Operate the device with AT Commands in the shell
Location GPS Signal
Tracking Location Route by GPS Signal
Info Operator, Cell ID, LAC, MNC, MCC, Signal strength
OTA Remote Update Software
General
Dimensions 100 x 53 x 28 mm
Weight 89g
GSM/GPS Antenna inline
Power Supply Battery with 6000mAh
Mounting Via magnetic foot or wall mounted by M4 screws
SIM Card Format 2FF/eSIM
Operating temp. -20..60°C
Storage temp. -40..85°C
Oper.humidity Max. 85%
Storage humidity Max. 85%
IP Class IP65
Approvals

Bildergebnis für CE

Europe
R&TTE / GCF / RED
Conformity Declarations EMC-Directive 2014/30/EU

EN 55022:2010

EN 55024:2010

IEC 61000-6-1:2005

IEC 61000-6-3:2011

R&TTE-Directive 2014/53/EU

EN 301 511 V9.0.2

EN 301 908-1 V6.2.1

EN 301 908-2 V6.2.1

RoHS-DIrective 2011/65/EU

EN 50581:2012

Laser Ranging Sensor 3 Axis Accelerometer Battery Wake Up Activity detection Temperature Monitor Humidity Monitor MQTT Agent MQTT-SN Agent Mobile-NB-IOT*

(release in April2019)

Mobile-2G/3G GPS IP65
Smartbox nano TankMon x x x x x x x x
Smartbox nano GPS x x x x x x x x
Smartbox nano TankMon (NB) x x x x x x x x
Smartbox nano GPS (NB) x x x x x x x x x

..more assembly variants on Request